All schools & programs >

School of Engineering

Visit their website » Print...

Principal Course Distribution Requirement

Principal courses offer introductions to the breadth of disciplines in the College. They acquaint students with the subject matter in an area, with the types of questions that are asked about that subject matter, with the knowledge that has been developed and is now basic to the area, and with the methods and standards by which claims to truth are judged.

Students must complete courses in topical groups in three major divisions (humanities, natural sciences and mathematics, and social sciences). For the B.A., three courses are required from each division, with no more than one course from any topical group. The B.G.S. requires two courses from each division, with no more than one from any topical group. To fulfill the requirement, a course must be designated as a principal course according to the codes listed below.

These are the major divisions, their topical subgroups, and the codes that identify them:

Humanities

  • HT: Historical studies
  • HL: Literature and the arts
  • HR: Philosophy and religion

Natural Sciences and Mathematics

  • NB: Biological sciences
  • NE: Earth sciences
  • NM: Mathematical sciences
  • NP: Physical science

Social Sciences

  • SC: Culture and society
  • SI: Individual behavior
  • SF: Public affairs

No course may fulfill both a principal course distribution requirement and a non-Western culture or second-level mathematics course requirement. Laboratory science courses designated as principal courses may fulfill both the laboratory science requirement and one of the distribution requirements. No free-standing laboratory course may by itself fulfill either the laboratory science requirement or a principal course requirement. Students should begin taking principal courses early in their academic careers. An honors equivalent of a principal course may fulfill a principal course requirement.

View all approved principal course distribution courses »

Non-Western Culture Requirement

A non-Western culture course acquaints students with the culture, society, and values of a non-Western people, for example, from Asia, the Pacific Islands, the Middle East, or Africa. Students must complete one approved non-Western culture course.

One approved non-Western culture course is required. Occasionally courses with varying topics fulfill the non-Western culture course requirement. See the Schedule of Classes for details. These courses are coded NW.

View all approved non-Western culture courses »

Transfer and Earned Credit Course Codes

These codes are used to evaluate transfer credit and to determine which academic requirements a course meets.

  • H: Humanities
  • N: Natural Sciences and Mathematics
  • S: Social Sciences
  • W: World Civilization and Culture
  • U: Undesignated Elective Credit (course does not satisfy distribution requirement)

All Engineering courses

Show courses in ENGR with a course number to
worth in .

There are 632 results.

A detailed study of the comprehensive transportation planning process which involves the determination of urban travel characteristics and needs from studies of traffic, social-economical, and environmental factors, as well as the applications of land use, trip generation, trip distribution, model split, and traffic assignment models. Prerequisite: CE 781 or equivalent. LEC
View current sections...
A study of the scientific principles of pavement design as applied to airfield and highway pavements, considering loading conditions, stress distribution, and the properties of the various pavement components, for both rigid and flexible pavements. Prerequisite: CE 487 or equivalent. LEC
View current sections...
A study in the design, construction, and behavior of footings and rafts, piles and drilled shafts founded on soils and rocks. Prerequisite: CE 588 or equivalent. LEC
View current sections...
Rock properties and behavior; theories of failure of brittle, jointed, and anisotropic rocks; rock support; laboratory and in-situ testing techniques. Prerequisite: A course in physical geology and CE 487 or equivalent. LEC
View current sections...
Current theory and practice relating to the design of retaining walls, earth slopes, large embankments, and landslide mitigation. Application of geotextiles to the design of earth retaining structures and slope stabilization. Prerequisite: CE 588 or consent of instructor. LEC
View current sections...
Basic descriptions, classification, principles, advantages, and limitations of ground improvement techniques. Design, construction, and quality assurance/control of ground improvement techniques. Prerequisite: CE 588 or equivalent. LEC
View current sections...
Basic description and properties of geosynthetics including geotextiles, geogrids, geomembranes, geonets, geocomposites, and geosynthetic clay liners. Geosynthetic functions and mechanisms including separation, filtration, drainage, reinforcement, and containment. Design with geosynthetics for roadways, embankments/slopes, earth retaining structures, and landfills. Prerequisite: CE 588 or equivalent. LEC
View current sections...
Directed study and reporting of a specialized topic of interest in civil engineering or an allied field. Prerequisite: Consent of instructor. RSH
View current sections...
A directed study of a particular complex problem in an area of civil engineering or allied filed. Prerequisite: Varies by topic, or with consent of instructor. LEC
View current sections...
Presentation and discussion of current research and design in structural engineering and engineering mechanics. LEC
View current sections...
A graduate course or colloquium in a topic of civil engineering or an allied field. Prerequisite: Varies by topic, or with consent of instructor. LEC
View current sections...
Directed research and reporting of a specialize topic of interest in civil engineering or an allied field. Prerequisite: Consent of instructor. THE
View current sections...
Vibrations of mechanical systems and structures. Nonlinear vibrations. Random vibration. Prerequisite: CE 704 or AE 704. LEC
View current sections...
Plastic stress-strain relationships. Stress and deformation in thick-walled shells, rotating discs, and bars subjected to torsion and bending for ideally plastic materials. Plastic flow of strain-hardening materials. Theory of metal-forming processes including problems in drawing and extruding. LEC
View current sections...
Development of Griffith-Irwin crack theory and plane strain-stress intensity factors. Advanced analytical and experimental aspects of fracture and fatigue. Development of fracture control plans. Prerequisite: CE 767 or consent of instructor. LEC
View current sections...
The mechanics of continuous media. A unified treatment of the fundamental principles and theories governing applications in solid and fluid mechanics. Topics covered are stress, strain and deformation, general physical principles for the continuum, and various constitutive equations. LEC
View current sections...
Topics such as thermal stresses, vibrations in elastic continuum, dynamic instability, and other advanced topics. LEC
View current sections...
Advanced treatment of finite element techniques for structural analysis including material and geometric non-linearity and the solution of large scale dynamics problems. Prerequisite: CE 861 or ME 761 or equivalent. LEC
View current sections...
A study of the principles and implementation skills of the most up-to-date versions of several urban transportation planning software packages. The course involves a two-hour lecture and a three-hour laboratory period. Prerequisite: CE 883, or UBPL 750, or equivalent. LEC
View current sections...
An investigation of a special problem directly related to civil engineering. RSH
View current sections...
Restricted to Ph.D. candidates. Before candidacy, aspirants performing their research should enroll in CE 991. Prerequisite: Consent of instructor. THE
View current sections...
Analysis of design alternatives and investment opportunities based on the time value of money. Topics include financial statements and accounting concepts related to economic analysis, time value of money and cash flow equivalence, cost of capital and minimum attractive rate of return (MARR), defining mutually exclusive alternatives, developing alternative after-tax cash flows, performing investment and replacement studies, and methods for addressing uncertainty and risk. Prerequisite: MATH 220 or MATH 320, or consent of the instructor. LEC
View current sections...
An introduction to the construction industry, construction project management, and construction operations. Topics include project participant roles and responsibilities; project delivery systems; procurement of construction services; sustainable construction; contracts, bonds, and insurance; equipment selection and use; constructability and value engineering; estimating and bidding; planning and scheduling; operations management; safety; and project commissioning and closeout. Prerequisite: Junior or Senior standing in the School of Engineering, or consent of the instructor. LEC
View current sections...
An introduction to the management of construction projects. This course addresses project delivery systems, project organization, estimating and bidding, planning and scheduling, legal and safety issues, among other topics. Prerequisite: Graduate standing or consent of instructor. Not open to those with credit in CMGT 500. LEC
View current sections...
An introduction to the planning and scheduling of projects, for both construction and design. Emphasis is placed on the critical path method including network development, production of time schedules, time-cost considerations, and the efficient utilization of resources. Manual and computer techniques are covered. Prerequisite: CMGT 500 or CMGT 700, and MATH 526 or EMGT 802, or consent of instructor. LEC
View current sections...
This course introduces the student to the multitude of construction equipment employed in construction. The underlying technology and engineering principles are reviewed. Principles of equipment selection, equipment utilization, and equipment economic analysis are covered. Prerequisite: CMGT 500 or CMGT 700, MATH 526 or EMGT 802, and CMGT 357 or EMGT 806, or consent of instructor. LEC
View current sections...
Operations analysis for work improvement in construction using process charts, crew balancing, time-lapse photography, and planning techniques. Regulations, accident prevention, and safety management are covered. Prerequisite: CMGT 500 or CMGT 700, MATH 526 or EMGT 802, and CMGT 357 or EMGT 806, or consent of instructor. LEC
View current sections...
A study of the quantity survey, cost estimating, scheduling and project controls; construction operations; and methods of building construction. Prerequisite: CMGT 500 or CMGT 700, MATH 526 or EMGT 802, and CMGT 357 or EMGT 806, or consent of instructor. LEC
View current sections...
Legal doctrines relating to owners, design professionals, and contractors. Sources of law, forms of association, and agency. Contract formation, rights and duties, interpretation, performance problems, disputes, and claims. Surety bonds and insurance. Prerequisite: CMGT 500 or CMGT 700, or consent of instructor. LEC
View current sections...
This course introduces students to Sustainable Design Concepts that are applicable to Civil and Architectural Engineering. Prerequisite: Senior or graduate standing in Architectural Engineering, Architecture, or Civil Engineering or consent of instructor. LEC
View current sections...
An introduction to the management of international construction projects. This course focuses on areas where international construction project management differs from the management of domestic construction projects. Topics include project delivery systems including build-operate-transfer (BOT) and other systems unique to international construction contracts; the impact of the host country's language, demographics, laws, political structure, geography, economics, culture, and customs on project delivery; currency transfer and risk; procurement and expediting; designing construction means and methods that optimize available labor, material, and equipment; participant roles and responsibilities; among other topics. Prerequisite: CMGT 500 or CMGT 700, or consent of instructor. LEC
View current sections...
Prerequisite: Varies with topic. LEC
View current sections...
Graduate-level directed readings on a topic in construction management mutually agreed on by the student and instructor. Intended to build on one or more of the core course topics: project management; planning and scheduling; equipment and methods; quality; productivity and safety; estimating and bidding; contracts, bonds, and insurance. CMGT 801 may be repeated for credit to a maximum of three hours in the degree program. Mutually agreed course deliverable(s) required. Prerequisite: Approval of the course topic and deliverable(s) by the instructor, CMGT 500 or CMGT 700, CMGT 701, CMGT 702, CMGT 703, CMGT 704, and CMGT 705, or consent of instructor. IND
View current sections...
Graduate-level investigation requiring research of a topic in construction management mutually agreed on by the student and instructor. Intended to build on one or more of the core course topics: project management; planning and scheduling; equipment and methods; quality; productivity and safety; estimating and bidding; contracts, bonds, and insurance. CMGT 802 may be repeated for credit to a maximum of three hours in the degree program. Mutually agreed course deliverable such as a paper summarizing the results of the investigation required. Prerequisite: Approval of the course topic and deliverable by the instructor, CMGT 500 or CMGT 700, CMGT 701, CMGT 702, CMGT 703, CMGT 704, and CMGT 705, or consent of instructor. IND
View current sections...
Project level cost control concepts and structure, time and cost integration, data collection and reporting, equipment cost, job overhead cost, and cost control. Integrating construction project level cost with construction company financial accounting and financial management. Prerequisite: CMGT 702 and CMGT 704 or consent of instructor. LEC
View current sections...
Prerequisite: Varies with topic. LEC
View current sections...
Graduate-level investigation and report on a construction management topic mutually agreed on by the student and project adviser. This is the capstone course in the Master of Construction Management (MCM) degree program. Successful completion of this project requires acceptance of the written report and oral presentation to the student's graduate committee. Prerequisite: Approval of project topic by project adviser, CMGT 500 or CMGT 700, CMGT 701, CMGT 702, CMGT 703, CMGT 704, CMGT 705, and nine elective credit hours, or consent of instructor. IND
View current sections...
Introduction to information technology and the computer as a general tool processing information. Topics include internet tools (including browsers, search engines and web page construction), networking, computer organization, algorithms, programming languages, data representation and manipulation, binary numbers and Boolean logic, system and application software (including word processors, spreadsheets and presentation software), operating systems, databases, artificial intelligence, social and ethical issues in computing, information security, and mobile computing. Prerequisite: MATH 101 or MATH 104 or eligibility to enroll in MATH 115 or MATH 121. LEC
View current sections...
Introduction of computer-based problem solving techniques for engineering practice with emphasis on good programming practices and the integration of appropriate computational and related tools. Solutions are computed using Visual Basic, specifically VBA within Excel. Elementary numerical and statistical methods are applied to the solution of sets of linear and nonlinear algebraic equations, linear regression, and root finding. Microsoft Office is used with the computational tools to provide integrated report generation capability. Two lectures and a weekly laboratory instruction. Prerequisite: MATH 104. LEC
View current sections...
Algorithm development, basic computer organization, syntax and semantics of a high-level programming language, including testing and debugging. Concept of structure in data and programs, arrays, top-down design, subroutines and library programs. Abstract data types. System concepts such as compilation and files. Nature and scope of computer science. Not open to students who have taken EECS 805. Prerequisite: MATH 101 or MATH 104, or meeting the requirements to enroll in MATH 115 or MATH 121. LEC
View current sections...
An introductory course in digital logic circuits covering number representation, digital codes, Boolean Algebra, combinatorial logic design, sequential logic design, and programmable logic devices. Corequisite: MATH 104. LEC
View current sections...
An introductory course in digital logic circuits covering number representation, digital codes, Boolean algebra, combinatorial logic design, sequential logic design, and programmable logic devices. This course is intended for highly motivated students and includes honors-level assignments. Co-requisite: MATH 121, plus either acceptance into the KU Honors Program or consent of instructor. LEC
View current sections...
Problem solving using a high level programming language and object oriented software design. Fundamental stages of software development are discussed: problem specification, program design, implementation, testing, and documentation. Introduction to programming using an object oriented language: using classes, defining classes, and extending classes. Introduction to algorithms and data structures useful for problem solving: arrays, lists, files, searching, and sorting. Student will be responsible for designing, implementing, testing, and documenting independent programming projects. Professional ethics are defined and discussed in particular with respect to computer rights and responsibilities. Corequisite: MATH 104. LEC
View current sections...
Problem solving using a high level programming language and object oriented software design. Fundamental stages of software development are discussed: problem specification, program design, implementation, testing, and documentation. Introduction to programming using an object oriented language: using classes, defining classes, extending classes. Introduction to algorithms and data structures useful for problem solving: arrays, lists, files, searching, and sorting. Students will be responsible for designing, implementing, testing, and documenting independent programming projects. Professional ethics are defined and discussed in particular with respect to computer rights and responsibilities. This course is intended for highly motivated students and includes honors-level assignments. Co-requisite: MATH 121, plus either acceptance into the KU Honors Program or consent of instructor. LEC
View current sections...
Mathematical foundations including logic, sets and functions, general proof techniques, mathematical induction, sequences and summations, number theory, basic and advanced counting techniques, solution of recurrence relations, equivalence relations, partial order relations, lattices, graphs and trees, algorithmic complexity, and algorithm design and analysis. Throughout there will be an emphasis on the development of general problem solving skills including algorithmic specification of solutions and the use of discrete structures in a variety of applications. Prerequisite: EECS 168 or 169 (or equivalent) and MATH 122. LEC
View current sections...
Analysis of linear electrical circuits: Kirchoff's laws; source, resistor, capacitor and inductor models; nodal and mesh analysis; network theorems; transient analysis; Laplace transform analysis; steady-state sinusoidal analysis; computer-aided analysis. Prerequisite: Co-requisite: Math 220 and MATH 290. LEC
View current sections...
Continued study of electrical circuits: Steady-state power analysis, three-phase circuits, transformers, frequency response, and two-port network analysis. Prerequisite: EECS 211. LEC
View current sections...
Vector analysis. Electrostatic and magnetostatic fields in a vacuum and material media. Electromagnetic fields and Maxwell's equations for time-varying sources. The relationship between field and circuit theory. Simple applications of Maxwell's equations. Prerequisite: MATH 220, MATH 290, PHSX 211, and EECS 211. LEC
View current sections...
This course continues developing problem solving techniques by focusing on the imperative and object-oriented styles using Abstract Data Types. Basic data structures such as queues, stacks, trees, and graphs will be covered. Recursion. Basic notions of algorithmic efficiency and performance analysis in the context of sorting algorithms. Basic Object-Oriented techniques. An associated laboratory will develop projects reinforcing the lecture material. Three class periods and one laboratory period per week. Prerequisite: EECS 168 or EECS 169. LEC
View current sections...
Introduction to diodes, BJTs and MOSFETs, and their use in electronic circuits, especially digital circuits. Prerequisite: Upper-level eligibility. Corequisite: EECS 212. LEC
View current sections...
Introduction to DC and AC electrical circuit analysis techniques, AC power calculations, transformers, three-phase systems, magnetic circuits, and DC and AC machines with a focus on applications. Not open to electrical or computer engineering majors. Prerequisite: A course in differential equations and eight hours of physics. LEC
View current sections...
Introduction to DC and AC electrical circuit analysis, operational amplifiers, semiconductors, digital circuits and systems, and electronic instrumentation and measurements with a focus on applications. Not open to electrical or computer engineering majors. Students may not receive credit for both EECS 316 and EECS 317. Prerequisite: A course in differential equations and eight hours of physics. LEC
View current sections...
Introduction to operational amplifiers, semiconductors, digital circuits and systems, and electronic instrumentation and measurements with a focus on applications. Not open to electrical or computer engineering majors. Students may not receive credit for both EECS 316 and EECS 317. Prerequisite: EECS 315. LEC
View current sections...
Laboratory exercises intended to complement EECS 315, EECS 316 and EECS 317. Experiments include DC circuits, analog electronics, and digital electronics. Not open to electrical or computer engineering majors. Co-requisite: EECS 316 or EECS 317. LAB
View current sections...
Fourier signal analysis (series and transform); linear system analysis (continuous and discrete); Z-transforms; analog and digital filter analysis. Analysis and design of continuous and discrete time systems using MATLAB. Prerequisite: EECS 212 and upper level EECS eligibility. LEC
View current sections...
The course is a survey of programming languages: their attributes, uses, advantages, and disadvantages. Topics include scopes, parameter passing, storage management, control flow, exception handling, encapsulation and modularization mechanism, reusability through genericity and inheritance, and type systems. In particular, several different languages will be studied which exemplify different language philosophies (e.g., procedural, functional, object-oriented, logic, scripting). Prerequisite: EECS 268 and upper-level EECS eligibility. LEC
View current sections...
Internal organization of microprocessor and microcontroller systems; programming in assembly language; input and output system; controlling external devices. The course will focus on one or two specific microprocessors and computer systems. Prerequisite: EECS 140 or EECS 141, EECS 168 or EECS 169, and upper-level EECS eligibility. LEC
View current sections...
An electrical engineering, computer engineering, or computer science project pursued under the student's initiative, culminating in a comprehensive report, with special emphasis on orderly preparation and effective composition. Prerequisite: Upper-level EECS eligibility and consent of instructor. IND
View current sections...
Discrete and integrated amplifier analysis and design. Introduction to feedback amplifier analysis and design. Introduction to feedback amplifiers. Prerequisite: EECS 312 and upper-level EECS eligibility. LEC
View current sections...
This course applies electromagnetic analysis to high frequency devices and systems where wave propagation effects cannot be neglected. Topics covered include transmission lines, space waves, waveguides, radiation, and antennas. Laboratory experiments include transmission line, waveguide, and antenna measurements and characterizations. 3 hours lecture, 1 hour laboratory. Prerequisite: EECS 220 and upper-level EECS eligibility. LEC
View current sections...
The design of computer systems from hardware point of view. The implementation of functional and control units. Introduction to VHDL, and its use in modeling and designing digital systems. Prerequisite: EECS 388. LEC
View current sections...
An introduction to the modeling, analysis, and design of linear control systems. Topics include mathematical models, feedback concepts, state-space methods, time response, system stability in the time and transform domains, design using PID control and series compensation, and digital controller implementation. Prerequisite: EECS 212 and EECS 360. LEC
View current sections...
This course is an introduction to software engineering, and it covers the systematic development of software products. It outlines the scope of software engineering, including life-cycle models, software process, teams, tools, testing, planning, and estimating. It concentrates on requirements, analysis, design, implementation, and maintenance of software products. The laboratory covers CASE tools, configuration control tools, UML diagrams, integrated development environments, and project specific components. Prerequisite: EECS 268 and upper-level EECS eligibility. LEC
View current sections...
Introduction to probability and statistics with applications. Reliability of systems. Discrete and continuous random variables. Expectations, functions of random variables, and linear regression. Sampling distributions, confidence intervals, and hypothesis testing. Joint, marginal, and conditional distribution and densities. Prerequisite: MATH 290, MATH 220 and upper-level EECS eligibility. LEC
View current sections...
An introduction to crystal structures, and metal, insulator, and semiconductor properties. Topics covered include the thermal, electric, dielectric, and optical properties of these materials. A significant portion of this course is devoted to the properties of semiconductors and semiconductor devices. Prerequisite: PHSX 313 and upper-level EECS eligibility. LEC
View current sections...
Arranged to allow students to satisfy the independent research requirement for graduation with departmental honors. Prerequisite: Consent of instructor and upper-level EECS eligibility. IND
View current sections...
A lecture/laboratory course involving the design and implementation of prototypes of electrical and computer type products and systems. The project specifications require consideration of ethics, economics, manufacturing, and safety. Prerequisite: EECS 412 and EECS 562. LEC
View current sections...
A lecture/laboratory course involving the design and implementation of prototypes of electrical and computer type products and systems. The project specifications require consideration of ethics, economics, health, manufacturing, and safety. Prerequisite: EECS 501. LEC
View current sections...
Finite state automata and regular expressions. Context-free grammars and pushdown automata. Turing machines. Models of computable functions and undecidable problems. The course emphasis is on the theory of computability, especially on showing limits of computation. May be taken for graduate credit. (Same as MATH 510.) Prerequisite: EECS 210 and upper-level EECS eligibility. LEC
View current sections...
Feedback amplifier circuit analysis, power amplifiers, analog IC op-amp techniques and analysis, filter approximation and realization, oscillators, wave generators and shapers. Prerequisite: EECS 412. LEC
View current sections...
A two semester lecture/laboratory course involving the specification, design, implementation, analysis, and documentation of a significant hardware and software computer system. Laboratory work involves software, hardware, and hardware/software trade-offs. Project requirements include consideration of ethics, economics, manufacturing, safety, and health aspects of product development. Can be taken only during the senior year. Prerequisite: EECS 443 and EECS 448. LEC
View current sections...
A two semester lecture/laboratory course involving the specification, design, implementation, analysis, and documentation of a significant hardware and software computer system. Laboratory work involves software, hardware, and hardware/software trade-offs. Project requirements include consideration of ethics, economics, manufacturing, safety, and health aspects of product development. Can be taken only during the senior year. Prerequisite: EECS 541. LEC
View current sections...
The design, analysis, simulation, and layout of integrated circuit systems using CMOS technology. Students will carry out a design from initial concept through mask layout. The use of computer aided design tools is emphasized. Prerequisite: EECS 312 and EECS 470. LEC
View current sections...
Data abstraction and abstract data types. Topics include the design and implementation of dictionary, priority queues, concatenated queue, disjoint set structures, graphs, and other advanced data structures based on balanced and unbalanced tree structures. Special emphasis will be placed on the implementations of these structures and their performance tradeoffs. Both asymptotic complexity analysis and experimental profiling techniques will be introduced. Labs will be used to provide students with hands-on experience in the implementations of various abstract data types and to perform experimental performance analysis. Prerequisite: EECS 210 and EECS 448. LEC
View current sections...
A first course in communications, including lectures and integrated laboratory experiments. After a review of spectral analysis and signal transmission, analog and digital communications are studied. Topics include: sampling, pulse amplitude modulation, and pulse code modulation; analog and digital amplitude, frequency, and phase modulation; frequency and time division multiplexing; and noise performance of analog modulation techniques. Prerequisite: EECS 212 and EECS 360. LEC
View current sections...
An introduction to the principles used in communication networks is given in this course. Topics include a discussion of the uses of communications networks, network traffic, network impairments, standards, layered reference models for organizing network functions. Local Area Network technology and protocols are discussed. Link, network, transport layer protocols, and security are introduced. TCP/IP networks are stressed. VoIP is used as an example throughout the course. Basic concepts of network performance evaluation are studied, both analytical and simulation techniques are considered. Prerequisite: EECS 168 and either EECS 461 or MATH 526. LEC
View current sections...
An introductory course on electric power generation and transmission. Topics will include: electric power system components; environmental impact; renewable energy sources; power system networks and flow; synchronous generators; transformers; high voltage transmission systems; power quality; stability; blackouts. Prerequisite: EECS 212 or EECS 315 and EECS 220 or PHSX 212. LEC
View current sections...
The background and planning phase of a two-semester, team-oriented lecture/laboratory course involving the specification, design, implementation, and documentation of a significant software system. The course includes the consideration of project management, ethics, economics, and technical writing. Can be taken only during the senior year. Prerequisite: EECS 448, EECS 510 and EECS 560. LEC
View current sections...
The design and implementation phase of a two-semester, team-orientated lecture/laboratory course involving the specification, design, implementation, and documentation of a significant software system. The course includes the consideration of project management, ethics, economics, and technical writing. Can be taken only during the senior year. Prerequisite: EECS 581. LEC
View current sections...
A study of unwanted generation and reception of radio-frequency radiation from analog and digital electronic systems and how these emissions/receptions can be reduced. Topics covered include sources of radiation, grounding, shielding, crosstalk, electrostatic discharge, and practical design and layout schemes for reducing unwanted radiation and reception. Also covered are the major governmental electromagnetic compatibility (EMC) regulations and standards that apply to commercial electronic devices and systems. Prerequisite: EECS 220 and EECS 312. LEC
View current sections...
Introduction to radio transmission systems. Topics include radio transmitter and receiver design, radiowave propagation phenomenology, antenna performance and basic design, and signal detection in the presence of noise. Students will design radio systems to meet specified performance measure. Corequisite: EECS 420 and EECS 461. LEC
View current sections...
Description and analysis of the key components in optical communication systems. Topics covered include quantum sources, fiber cable propagation and dispersion characteristics, receiver characteristics, and system gain considerations. Prerequisite: EECS 220 and PHSX 313 or equivalent and upper-level EECS eligibility. LEC
View current sections...
Basic information about expert systems: architecture of an expert system, building expert systems, uncertainty in expert systems, taxonomy of expert systems. Knowledge representation: first order logic, production systems, semantic nets, frames. Uncertainty in expert systems, one-valued approaches: probability theory, systems using Bayes' rule, and systems using certainty theory; two-valued approaches: systems using Dempster-Shafer theory and system INFERNO; set-valued approaches: systems using fuzzy set theory and systems using rough set theory. Prerequisite: EECS 560 or consent of instructor. LEC
View current sections...
Principles and techniques of instruction level parallelism, Tomasulo's algorithm, branch prediction, reservation stations, recorder buffers, memory hierarchies. Parallel and scalable architectures, global directory caches, synchronization primitives, memory consistency, multithreading. Only one of EECS 643 and EECS 645 may be used to satisfy EECS degree requirements. Prerequisite: EECS 443. LEC
View current sections...
Discrete time signal and systems theory, sampling theorem, z-transforms, digital filter design, discrete Fourier transform, FFT, and hardware considerations. Prerequisite: EECS 360. LEC
View current sections...
The structure and design of computing systems. Examination and analysis of computing systems. Examination and analysis of instruction set architectures, pipelined control and arithmetic units, vector processors, memory hierarchies, and performance evaluation. Prerequisite: EECS 388. LEC
View current sections...
Introduction to the concept of databases and their operations. Basic concepts, database architectures, storage structures and indexing, data structures: hierarchical, network, and relational database organizations. Emphasis on relational databases and retrieval languages SQL, QBE, and ones based on relational algebra and relational calculus; brief description of predicate calculus. Theory of databases, normal forms, normalization, candidates keys, decomposition, functional dependencies, multi-valued dependencies. Introduction to the design of a simple database structure and a data retrieval language. Student cannot receive credit for both EECS 647 and EECS 746. Prerequisite: EECS 448. LEC
View current sections...
This course focuses on the software engineering tools and practices currently in use in the industry, supporting the complete software development lifecycle. The course provides hands-on experience with current software development tools. Topics include software engineering artifacts, team structure and roles, work contracts, requirements elicitation and analysis, specifications, supplementary specifications, use-case models, activity diagrams, use-case specifications, traceability, technical design, design review meetings, coding standards, code quality, code reviews, and modern software engineering tools. Prerequisite: EECS 448. LEC
View current sections...
General concepts, search procedures, two-person games, predicate calculus and automated theorem proving, nonmonotonic logic, probabilistic reasoning, rule based systems, semantic networks, frames, dynamic memory, planning, machine learning, natural language understanding, neural networks. Corequisite: EECS 368. LEC
View current sections...
Basic concepts and techniques in the design and analysis of computer algorithms. Models of computations. Simple lower bound theory and optimality of algorithms. Computationally hard problems and the theory of NP-Completeness. Introduction to parallel algorithms. Prerequisite: EECS 560 and either EECS 461 or MATH 526. LEC
View current sections...
Formal definition of programming languages including specification of syntax and semantics. Simple statements including precedence, infix, prefix, and postfix notation. Global properties of algorithmic languages including scope of declaration, storage allocation, grouping of statements, binding time of constituents, subroutines, coroutines, and tasks. Run-time representation of program and data structures. Prerequisite: EECS 368 and EECS 388 and EECS 560. LEC
View current sections...
Compilation of simple expressions and statements. Organization of a compiler including symbol tables, lexical analysis, syntax analysis, intermediate and object code generation, error diagnostics, code optimization techniques and run-time structures in a block-structured language such as PASCAL or C. Programming assignments include using tools for lexer and parser generator, and intermediate , and object code generation techniques. Laboratory exercises will provide hands-on experience with the tools and concepts required for the programming assignments. Prerequisite: EECS 368, EECS 448, and EECS 510. LEC
View current sections...
An overview of various processes to fabricate semiconductor devices and integrated circuits. Topics covered include crystal growth, oxidation, solid-state diffusion, ion implantation, photolithography, chemical vapor deposition, epitaxial growth, metalization, and plasma etching of thin films. (Same as C&PE 655.) Prerequisite: Senior standing in C&PE or EECS, or consent of instructor. LEC
View current sections...
Foundations of 2D and 3D computer graphics. Structured graphics application programming. Basic 2D and 3D graphics algorithms (modeling and viewing transformations, clipping, projects, visible line/surface determination, basic empirical lighting, and shading models), and aliasing. Prerequisite: EECS 448. LEC
View current sections...
The objective of this course is to provide the students with the concepts necessary to enable them to: a) identify the abstract services common to all operating system, b) define the basic system components that support the operating system's machine independent abstractions on particular target architectures, c) consider how the design and implementation of different systems components interact and constrain one another, not merely how one or two important parts work in isolation, and d) understand the means by which fundamental problems in operating systems can be analyzed and addressed. Programming assignments address topics including process creation, inter-process communication, system call implementation, process scheduling and virtual memory. Laboratory exercises primarily focus on use of tools and concepts required for the programming assignments but include a small number of independent topics. Prerequisite: EECS 388 and EECS 448. LEC
View current sections...
Arranged as needed to present appropriate material to groups of students. May be repeated for additional credit. Prerequisite: Upper-level EECS eligibility and consent of instructor. LEC
View current sections...
Reading under the supervision of an instructor on a topic chosen by the student with the advice of the instructor. May be repeated for additional credit. Consent of the department required for enrollment. Prerequisite: Upper-level EECS eligibility and consent of instructor. IND
View current sections...
Courses on special topics of current interest in electrical engineering, computer engineering, or computer science, given as the need arises. May be repeated for additional credit. Prerequisite: Variable. LEC
View current sections...
Introduction to programming and algorithm development, classes and objects, various control structures, modular programming, function and procedures, recursive function, data structures, abstract data types, arrays, dynamic memory allocation, sorting and searching strategies, linked listed, stacks, queues, trees, time and space complexities, elementary algorithm analysis. This course will not count toward any EECS degree. Prerequisite: Admitted to an EECS MS program. LEC
View current sections...
Introduction to the structure of digital computer systems, layers of virtual machines, CPU, input-output peripherals, memory unit, digital information representation, assembly language programming, register machines, microprogramming, language processors; basic concepts of operating systems and system programming; processes and interprocess communication, memory management, virtual memory, program loading and linking, file and I/O subsystems; Unix operating system. This course will not count toward any EECS degree. Prerequisite: EECS 701. LEC
View current sections...
 1 2 3 4 5 6 7 > 

The University of Kansas prohibits discrimination on the basis of race, color, ethnicity, religion, sex, national origin, age, ancestry, disability, status as a veteran, sexual orientation, marital status, parental status, gender identity, gender expression and genetic information in the University’s programs and activities. The following person has been designated to handle inquiries regarding the non-discrimination policies: Director of the Office of Institutional Opportunity and Access, IOA@ku.edu, 1246 W. Campus Road, Room 153A, Lawrence, KS, 66045, (785)864-6414, 711 TTY.